Benz C6 OEM Multiplexer MB Star C6 Mercedes Benz Xentry diagnosis VCI With Doip Fuction

Benz C6 OEM Multiplexer MB Star C6 Mercedes Benz Xentry diagnosis VCI With Doip Fuction

Benz C6 OEM Multiplexer MB Star C6 Mercedes Benz Xentry diagnosis VCI With Doip Fuction

  • Product Code:vci22083
  • Availability:In Stock
  • $758.00

  • Ex Tax:$758.00

Benz C6 OEM Multiplexer MB Star C6 Mercedes Benz Xentry diagnosis VCI With Doip Fuction

V2018.12 Mercedes BEZN C6 OEM DOIP Xentry Diagnosis 

After-sales service: Free Technical Support

If you have any problem, please do not hesitate to contact us.

Email   :autovci@outlook.com

Skype :autovci

lineid :autovci

WhatsApp (+86)17725791527

Website: www.autovci.com


With 2018.12 500GB HDD


Attention : 

It can not support vehicles not standard OBD2 port, vehicles have both OBD2 port and 38 pin port also not support.



Mercedes Benz C6 OEM Xentry diagnosis VCI DOIP Pass thur interfac is the latest interface for For Mercedes & SMART vehicles can replace Star C4/C5. XENTRY Diagnosis VCI acts as a Pass-through Interface, also called MB Star C6, For Benz C6 multiplexer to provide complete communication between a vehicle and the XENTRY software loaded on a PC.


Mercedes Benz Xentry diagnosis VCI DOIP Pass thur interface Benz C6 Overview:


Compatible Software: VXDIAG For XENTRY/Das Software

Support Vehicle: Mercede For Benz & Smart vehicles

DoIP: Support DoIP

Functions: Star Diagnostic & programming (SCN Coding)


Mercedes Benz Xentry diagnosis VCI DOIP Pass thur interface C6  Features:


Can be used for all model series of For Mercedes For Benz vehicles

Support DoIP, cover more functions during SCN Coding than SD C4/C5

Functions including diagnosing, programming, simulation studying, repair information, automotive maintenance, technical service bulletin and so on

Diagnosis updates no longer necessary – firmware updates required on rare occasions

Does not need a power supply unit for external power supply

Dandy multiplexer with a small, sturdy construction (no PC core, battery, fan, or display)

Engines (All Gasoline & Diesel Systems)

Transmissions and Electronic Selector Modules

Airmatic and Active Body Control Suspension Systems

Traction Systems: ESP / ASR / ETS / ABS / BAS / SBC braking systems

Supplementary Restraint Systems (SRS) / Airbag, All body modules OCP / UCP / LCP / SCM / SKF / KFB / RCM / DCM’s

Drive Authorisation System

Sam (Signal Acquisition) Modules

Electronic Ignition System (EIS)

Pneumatic System Equipment and ATA functions

Air Conditioning / climate control Systems

Instrument Cluster

Tyre Pressure Control

Parktronic System

Keyless Go

D2b Command & Audio Gateway (D2B and MOST networks)

TV Tuner

Headlamp Range Adjustment

Seat Electronics

Rvc, RST & Vario Roof modules

Automatic Clutch System ACS

M-Class Body Modules (AAM / EAM / DAS / SEM / VG Transfer Case)

Assyst & ASSYST + systems


Mercedes Benz Xentry diagnosis VCI DOIP Pass thur interface C6 Summary:


Mercedes Benz Xentry diagnosis VCI DOIP Pass thur interface C6 (Vehicle Communication Interface) multiplexer serves as the interface to the vehicle when performing diagnosis and repairs, and programming electric and electronic on-board vehicle systems.

 

The Mercedes Benz Xentry diagnosis VCI DOIP Pass thur interface C6 does not have its own PC core, battery, fan, or display. It is operated using the VXDIAG For XENTRY Diagnosis Pad via WLAN or a USB cable connection.


Notice: 


1. Please install the 500GB HDD on laptop above 4GB Memory and I5 CPU, and use it on one laptop only. If change laptop, software may get broken and need to ship HDD back to us to copy software again.

2. ThisMercedes Benz Xentry diagnosis VCI DOIP Pass thur interface C6 can/'t support All Key Lost,needs one key at least.

Write a review

Note: HTML is not translated!
    Bad           Good